AI Chatbot Ethics

AI Chatbot Ethics — independent reviews, comparisons, pricing and step-by-step guides on Aizhi.

• 

  Distribution management system

  A distribution management system (DMS) is a collection of applications designed to monitor and control the electric power distribution networks efficiently and reliably. It acts as a decision support system to assist the control room and field operating personnel with the monitoring and control of the electric distribution system. Improving the reliability and quality of service in terms of reducing power outages, minimizing outage time, maintaining acceptable frequency and voltage levels are the key deliverables of a DMS. Given the complexity of distribution grids, such systems may involve communication and coordination across multiple components. For example, the control of active loads may require a complex chain of communication through different components as described in US patent 11747849B2 In recent years, utilization of electrical energy increased exponentially and customer requirement and quality definitions of power were changed enormously. As electric energy became an essential part of daily life, its optimal usage and reliability became important. Real-time network view and dynamic decisions have become instrumental for optimizing resources and managing demands, leading to the need for distribution management systems in large-scale electrical networks. == Overview == Most distribution utilities have been comprehensively using IT solutions through their Outage Management System (OMS) that makes use of other systems like Customer Information System (CIS), Geographical Information System (GIS) and Interactive Voice Response System (IVRS). An outage management system has a network component/connectivity model of the distribution system. By combining the locations of outage calls from customers with knowledge of the locations of the protection devices (such as circuit breakers) on the network, a rule engine is used to predict the locations of outages. Based on this, restoration activities are charted out and the crew is dispatched for the same. In parallel with this, distribution utilities began to roll out Supervisory Control and Data Acquisition (SCADA) systems, initially only at their higher voltage substations. Over time, use of SCADA has progressively extended downwards to sites at lower voltage levels. DMSs access real-time data and provide all information on a single console at the control centre in an integrated manner. Their development varied across different geographic territories. In the US, for example, DMSs typically grew by taking Outage Management Systems to the next level, automating the complete sequences and providing an end to end, integrated view of the entire distribution spectrum. In the UK, by contrast, the much denser and more meshed network topologies, combined with stronger Health & Safety regulation, had led to early centralisation of high-voltage switching operations, initially using paper records and schematic diagrams printed onto large wallboards which were 'dressed' with magnetic symbols to show the current running states. There, DMSs grew initially from SCADA systems as these were expanded to allow these centralised control and safety management procedures to be managed electronically. These DMSs required even more detailed component/connectivity models and schematics than those needed by early OMSs as every possible isolation and earthing point on the networks had to be included. In territories such as the UK, therefore, the network component/connectivity models were usually developed in the DMS first, whereas in the USA these were generally built in the GIS. The typical data flow in a DMS has the SCADA system, the Information Storage & Retrieval (ISR) system, Communication (COM) Servers, Front-End Processors (FEPs) & Field Remote Terminal Units (FRTUs). == Why DMS? == Reduce the duration of outages Improve the speed and accuracy of outage predictions. Reduce crew patrol and drive times through improved outage locating. Improve the operational efficiency Determine the crew resources necessary to achieve restoration objectives. Effectively utilize resources between operating regions. Determine when best to schedule mutual aid crews. Increased customer satisfaction A DMS incorporates IVR and other mobile technologies, through which there is an improved outage communications for customer calls. Provide customers with more accurate estimated restoration times. Improve service reliability by tracking all customers affected by an outage, determining electrical configurations of every device on every feeder, and compiling details about each restoration process. == DMS Functions == In order to support proper decision making and O&M activities, DMS solutions should support the following functions: Network visualization & support tools Applications for Analytical & Remedial Action Utility Planning Tools System Protection Schemes The various sub functions of the same, carried out by the DMS are listed below:- === Network Connectivity Analysis (NCA) === Distribution network usually covers over a large area and catering power to different customers at different voltage levels. So locating required sources and loads on a larger GIS/Operator interface is often very difficult. Panning & zooming provided with normal SCADA system GUI does not cover the exact operational requirement. Network connectivity analysis is an operator specific functionality which helps the operator to identify or locate the preferred network or component very easily. NCA does the required analyses and provides display of the feed point of various network loads. Based on the status of all the switching devices such as circuit breaker (CB), Ring Main Unit (RMU) and/or isolators that affect the topology of the network modeled, the prevailing network topology is determined. The NCA further assists the operator to know operating state of the distribution network indicating radial mode, loops and parallels in the network. === Switching Schedule & Safety Management === In territories such as the UK a core function of a DMS has always been to support safe switching and work on the networks. Control engineers prepare switching schedules to isolate and make safe a section of network before work is carried out, and the DMS validates these schedules using its network model. Switching schedules can combine telecontrolled and manual (on-site) switching operations. When the required section has been made safe, the DMS allows a Permit To Work (PTW) document to be issued. After its cancellation when the work has been finished, the switching schedule then facilitates restoration of the normal running arrangements. Switching components can also be tagged to reflect any Operational Restrictions that are in force. The network component/connectivity model, and associated diagrams, must always be kept absolutely up to date. The switching schedule facility therefore also allows 'patches' to the network model to be applied to the live version at the appropriate stage(s) of the jobs. The term 'patch' is derived from the method previously used to maintain the wallboard diagrams. === State Estimation (SE) === The state estimator is an integral part of the overall monitoring and control systems for transmission networks. It is mainly aimed at providing a reliable estimate of the system voltages. This information from the state estimator flows to control centers and database servers across the network. The variables of interest are indicative of parameters like margins to operating limits, health of equipment and required operator action. State estimators allow the calculation of these variables of interest with high confidence despite the facts that the measurements may be corrupted by noise, or could be missing or inaccurate. Even though we may not be able to directly observe the state, it can be inferred from a scan of measurements which are assumed to be synchronized. The algorithms need to allow for the fact that presence of noise might skew the measurements. In a typical power system, the State is quasi-static. The time constants are sufficiently fast so that system dynamics decay away quickly (with respect to measurement frequency). The system appears to be progressing through a sequence of static states that are driven by various parameters like changes in load profile. The inputs of the state estimator can be given to various applications like Load Flow Analysis, Contingency Analysis, and other applications. === Load Flow Applications (LFA) === Load flow study is an important tool involving numerical analysis applied to a power system. The load flow study usually uses simplified notations like a single-line diagram and focuses on various forms of AC power rather than voltage and current. It analyzes the power systems in normal steady-state operation. The goal of a power flow study is to obtain complete voltage angle and magnitude information for each bus in a power system for specified load and generator real power and voltage conditions. Once this

  Read more →
• 

  Whitehead's algorithm

  Whitehead's algorithm is a mathematical algorithm in group theory for solving the automorphic equivalence problem in the finite rank free group Fn. The algorithm is based on a classic 1936 paper of J. H. C. Whitehead. It is still unknown (except for the case n = 2) if Whitehead's algorithm has polynomial time complexity. == Statement of the problem == Let F n = F ( x 1 , … , x n ) {\displaystyle F_{n}=F(x_{1},\dots ,x_{n})} be a free group of rank n ≥ 2 {\displaystyle n\geq 2} with a free basis X = { x 1 , … , x n } {\displaystyle X=\{x_{1},\dots ,x_{n}\}} . The automorphism problem, or the automorphic equivalence problem for F n {\displaystyle F_{n}} asks, given two freely reduced words w , w ′ ∈ F n {\displaystyle w,w'\in F_{n}} whether there exists an automorphism φ ∈ Aut ⁡ ( F n ) {\displaystyle \varphi \in \operatorname {Aut} (F_{n})} such that φ ( w ) = w ′ {\displaystyle \varphi (w)=w'} . Thus the automorphism problem asks, for w , w ′ ∈ F n {\displaystyle w,w'\in F_{n}} whether Aut ⁡ ( F n ) w = Aut ⁡ ( F n ) w ′ {\displaystyle \operatorname {Aut} (F_{n})w=\operatorname {Aut} (F_{n})w'} . For w , w ′ ∈ F n {\displaystyle w,w'\in F_{n}} one has Aut ⁡ ( F n ) w = Aut ⁡ ( F n ) w ′ {\displaystyle \operatorname {Aut} (F_{n})w=\operatorname {Aut} (F_{n})w'} if and only if Out ⁡ ( F n ) [ w ] = Out ⁡ ( F n ) [ w ′ ] {\displaystyle \operatorname {Out} (F_{n})[w]=\operatorname {Out} (F_{n})[w']} , where [ w ] , [ w ′ ] {\displaystyle [w],[w']} are conjugacy classes in F n {\displaystyle F_{n}} of w , w ′ {\displaystyle w,w'} accordingly. Therefore, the automorphism problem for F n {\displaystyle F_{n}} is often formulated in terms of Out ⁡ ( F n ) {\displaystyle \operatorname {Out} (F_{n})} -equivalence of conjugacy classes of elements of F n {\displaystyle F_{n}} . For an element w ∈ F n {\displaystyle w\in F_{n}} , | w | X {\displaystyle |w|_{X}} denotes the freely reduced length of w {\displaystyle w} with respect to X {\displaystyle X} , and ‖ w ‖ X {\displaystyle \|w\|_{X}} denotes the cyclically reduced length of w {\displaystyle w} with respect to X {\displaystyle X} . For the automorphism problem, the length of an input w {\displaystyle w} is measured as | w | X {\displaystyle |w|_{X}} or as ‖ w ‖ X {\displaystyle \|w\|_{X}} , depending on whether one views w {\displaystyle w} as an element of F n {\displaystyle F_{n}} or as defining the corresponding conjugacy class [ w ] {\displaystyle [w]} in F n {\displaystyle F_{n}} . == History == The automorphism problem for F n {\displaystyle F_{n}} was algorithmically solved by J. H. C. Whitehead in a classic 1936 paper, and his solution came to be known as Whitehead's algorithm. Whitehead used a topological approach in his paper. Namely, consider the 3-manifold M n = # i = 1 n S 2 × S 1 {\displaystyle M_{n}=\#_{i=1}^{n}\mathbb {S} ^{2}\times \mathbb {S} ^{1}} , the connected sum of n {\displaystyle n} copies of S 2 × S 1 {\displaystyle \mathbb {S} ^{2}\times \mathbb {S} ^{1}} . Then π 1 ( M n ) ≅ F n {\displaystyle \pi _{1}(M_{n})\cong F_{n}} , and, moreover, up to a quotient by a finite normal subgroup isomorphic to Z 2 n {\displaystyle \mathbb {Z} _{2}^{n}} , the mapping class group of M n {\displaystyle M_{n}} is equal to Out ⁡ ( F n ) {\displaystyle \operatorname {Out} (F_{n})} ; see. Different free bases of F n {\displaystyle F_{n}} can be represented by isotopy classes of "sphere systems" in M n {\displaystyle M_{n}} , and the cyclically reduced form of an element w ∈ F n {\displaystyle w\in F_{n}} , as well as the Whitehead graph of [ w ] {\displaystyle [w]} , can be "read-off" from how a loop in general position representing [ w ] {\displaystyle [w]} intersects the spheres in the system. Whitehead moves can be represented by certain kinds of topological "swapping" moves modifying the sphere system. Subsequently, Rapaport, and later, based on her work, Higgins and Lyndon, gave a purely combinatorial and algebraic re-interpretation of Whitehead's work and of Whitehead's algorithm. The exposition of Whitehead's algorithm in the book of Lyndon and Schupp is based on this combinatorial approach. Culler and Vogtmann, in their 1986 paper that introduced the Outer space, gave a hybrid approach to Whitehead's algorithm, presented in combinatorial terms but closely following Whitehead's original ideas. == Whitehead's algorithm == Our exposition regarding Whitehead's algorithm mostly follows Ch.I.4 in the book of Lyndon and Schupp, as well as. === Overview === The automorphism group Aut ⁡ ( F n ) {\displaystyle \operatorname {Aut} (F_{n})} has a particularly useful finite generating set W {\displaystyle {\mathcal {W}}} of Whitehead automorphisms or Whitehead moves. Given w , w ′ ∈ F n {\displaystyle w,w'\in F_{n}} the first part of Whitehead's algorithm consists of iteratively applying Whitehead moves to w , w ′ {\displaystyle w,w'} to take each of them to an "automorphically minimal" form, where the cyclically reduced length strictly decreases at each step. Once we find automorphically these minimal forms u , u ′ {\displaystyle u,u'} of w , w ′ {\displaystyle w,w'} , we check if ‖ u ‖ X = ‖ u ′ ‖ X {\displaystyle \|u\|_{X}=\|u'\|_{X}} . If ‖ u ‖ X ≠ ‖ u ′ ‖ X {\displaystyle \|u\|_{X}\neq \|u'\|_{X}} then w , w ′ {\displaystyle w,w'} are not automorphically equivalent in F n {\displaystyle F_{n}} . If ‖ u ‖ X = ‖ u ′ ‖ X {\displaystyle \|u\|_{X}=\|u'\|_{X}} , we check if there exists a finite chain of Whitehead moves taking u {\displaystyle u} to u ′ {\displaystyle u'} so that the cyclically reduced length remains constant throughout this chain. The elements w , w ′ {\displaystyle w,w'} are not automorphically equivalent in F n {\displaystyle F_{n}} if and only if such a chain exists. Whitehead's algorithm also solves the search automorphism problem for F n {\displaystyle F_{n}} . Namely, given w , w ′ ∈ F n {\displaystyle w,w'\in F_{n}} , if Whitehead's algorithm concludes that Aut ⁡ ( F n ) w = Aut ⁡ ( F n ) w ′ {\displaystyle \operatorname {Aut} (F_{n})w=\operatorname {Aut} (F_{n})w'} , the algorithm also outputs an automorphism φ ∈ Aut ⁡ ( F n ) {\displaystyle \varphi \in \operatorname {Aut} (F_{n})} such that φ ( w ) = w ′ {\displaystyle \varphi (w)=w'} . Such an element φ ∈ Aut ⁡ ( F n ) {\displaystyle \varphi \in \operatorname {Aut} (F_{n})} is produced as the composition of a chain of Whitehead moves arising from the above procedure and taking w {\displaystyle w} to w ′ {\displaystyle w'} . === Whitehead automorphisms === A Whitehead automorphism, or Whitehead move, of F n {\displaystyle F_{n}} is an automorphism τ ∈ Aut ⁡ ( F n ) {\displaystyle \tau \in \operatorname {Aut} (F_{n})} of F n {\displaystyle F_{n}} of one of the following two types: There is a permutation σ ∈ S n {\displaystyle \sigma \in S_{n}} of { 1 , 2 , … , n } {\displaystyle \{1,2,\dots ,n\}} such that for i = 1 , … , n {\displaystyle i=1,\dots ,n} τ ( x i ) = x σ ( i ) ± 1 {\displaystyle \tau (x_{i})=x_{\sigma (i)}^{\pm 1}} Such τ {\displaystyle \tau } is called a Whitehead automorphism of the first kind. There is an element a ∈ X ± 1 {\displaystyle a\in X^{\pm 1}} , called the multiplier, such that for every x ∈ X ± 1 {\displaystyle x\in X^{\pm 1}} τ ( x ) ∈ { x , x a , a − 1 x , a − 1 x a } . {\displaystyle \tau (x)\in \{x,xa,a^{-1}x,a^{-1}xa\}.} Such τ {\displaystyle \tau } is called a Whitehead automorphism of the second kind. Since τ {\displaystyle \tau } is an automorphism of F n {\displaystyle F_{n}} , it follows that τ ( a ) = a {\displaystyle \tau (a)=a} in this case. Often, for a Whitehead automorphism τ ∈ Aut ⁡ ( F n ) {\displaystyle \tau \in \operatorname {Aut} (F_{n})} , the corresponding outer automorphism in Out ⁡ ( F n ) {\displaystyle \operatorname {Out} (F_{n})} is also called a Whitehead automorphism or a Whitehead move. ==== Examples ==== Let F 4 = F ( x 1 , x 2 , x 3 , x 4 ) {\displaystyle F_{4}=F(x_{1},x_{2},x_{3},x_{4})} . Let τ : F 4 → F 4 {\displaystyle \tau :F_{4}\to F_{4}} be a homomorphism such that τ ( x 1 ) = x 2 x 1 , τ ( x 2 ) = x 2 , τ ( x 3 ) = x 2 x 3 x 2 − 1 , τ ( x 4 ) = x 4 {\displaystyle \tau (x_{1})=x_{2}x_{1},\quad \tau (x_{2})=x_{2},\quad \tau (x_{3})=x_{2}x_{3}x_{2}^{-1},\quad \tau (x_{4})=x_{4}} Then τ {\displaystyle \tau } is actually an automorphism of F 4 {\displaystyle F_{4}} , and, moreover, τ {\displaystyle \tau } is a Whitehead automorphism of the second kind, with the multiplier a = x 2 − 1 {\displaystyle a=x_{2}^{-1}} . Let τ ′ : F 4 → F 4 {\displaystyle \tau ':F_{4}\to F_{4}} be a homomorphism such that τ ′ ( x 1 ) = x 1 , τ ′ ( x 2 ) = x 1 − 1 x 2 x 1 , τ ′ ( x 3 ) = x 1 − 1 x 3 x 1 , τ ′ ( x 4 ) = x 1 − 1 x 4 x 1 {\displaystyle \tau '(x_{1})=x_{1},\quad \tau '(x_{2})=x_{1}^{-1}x_{2}x_{1},\quad \tau '(x_{3})=x_{1}^{-1}x_{3}x_{1},\quad \tau '(x_{4})=x_{1}^{-1}x_{4}x_{1}} Then τ ′ {\displaystyle \tau '} is actually an inner automorphism of F 4 {\displaystyle F_{4}} given by conjugation by x 1 {\displaystyle x_{1}} , and, moreover, τ ′ {\displaystyle \

  Read more →
• 

  Communication-avoiding algorithm

  Communication-avoiding algorithms minimize movement of data within a memory hierarchy for improving its running-time and energy consumption. These minimize the total of two costs (in terms of time and energy): arithmetic and communication. Communication, in this context refers to moving data, either between levels of memory or between multiple processors over a network. It is much more expensive than arithmetic. == Formal theory == === Two-level memory model === A common computational model in analyzing communication-avoiding algorithms is the two-level memory model: There is one processor and two levels of memory. Level 1 memory is infinitely large. Level 0 memory ("cache") has size M {\displaystyle M} . In the beginning, input resides in level 1. In the end, the output resides in level 1. Processor can only operate on data in cache. The goal is to minimize data transfers between the two levels of memory. === Matrix multiplication === Corollary 6.2: More general results for other numerical linear algebra operations can be found in. The following proof is from. == Motivation == Consider the following running-time model: Measure of computation = Time per FLOP = γ Measure of communication = No. of words of data moved = β ⇒ Total running time = γ·(no. of FLOPs) + β·(no. of words) From the fact that β >> γ as measured in time and energy, communication cost dominates computation cost. Technological trends indicate that the relative cost of communication is increasing on a variety of platforms, from cloud computing to supercomputers to mobile devices. The report also predicts that gap between DRAM access time and FLOPs will increase 100× over coming decade to balance power usage between processors and DRAM. Energy consumption increases by orders of magnitude as we go higher in the memory hierarchy. United States president Barack Obama cited communication-avoiding algorithms in the FY 2012 Department of Energy budget request to Congress: New Algorithm Improves Performance and Accuracy on Extreme-Scale Computing Systems. On modern computer architectures, communication between processors takes longer than the performance of a floating-point arithmetic operation by a given processor. ASCR researchers have developed a new method, derived from commonly used linear algebra methods, to minimize communications between processors and the memory hierarchy, by reformulating the communication patterns specified within the algorithm. This method has been implemented in the TRILINOS framework, a highly-regarded suite of software, which provides functionality for researchers around the world to solve large scale, complex multi-physics problems. == Objectives == Communication-avoiding algorithms are designed with the following objectives: Reorganize algorithms to reduce communication across all memory hierarchies. Attain the lower-bound on communication when possible. The following simple example demonstrates how these are achieved. === Matrix multiplication example === Let A, B and C be square matrices of order n × n. The following naive algorithm implements C = C + A B: for i = 1 to n for j = 1 to n for k = 1 to n C(i,j) = C(i,j) + A(i,k) B(k,j) Arithmetic cost (time-complexity): n2(2n − 1) for sufficiently large n or O(n3). Rewriting this algorithm with communication cost labelled at each step for i = 1 to n {read row i of A into fast memory} - n2 reads for j = 1 to n {read C(i,j) into fast memory} - n2 reads {read column j of B into fast memory} - n3 reads for k = 1 to n C(i,j) = C(i,j) + A(i,k) B(k,j) {write C(i,j) back to slow memory} - n2 writes Fast memory may be defined as the local processor memory (CPU cache) of size M and slow memory may be defined as the DRAM. Communication cost (reads/writes): n3 + 3n2 or O(n3) Since total running time = γ·O(n3) + β·O(n3) and β >> γ the communication cost is dominant. The blocked (tiled) matrix multiplication algorithm reduces this dominant term: ==== Blocked (tiled) matrix multiplication ==== Consider A, B and C to be n/b-by-n/b matrices of b-by-b sub-blocks where b is called the block size; assume three b-by-b blocks fit in fast memory. for i = 1 to n/b for j = 1 to n/b {read block C(i,j) into fast memory} - b2 × (n/b)2 = n2 reads for k = 1 to n/b {read block A(i,k) into fast memory} - b2 × (n/b)3 = n3/b reads {read block B(k,j) into fast memory} - b2 × (n/b)3 = n3/b reads C(i,j) = C(i,j) + A(i,k) B(k,j) - {do a matrix multiply on blocks} {write block C(i,j) back to slow memory} - b2 × (n/b)2 = n2 writes Communication cost: 2n3/b + 2n2 reads/writes << 2n3 arithmetic cost Making b as large possible: 3b2 ≤ M we achieve the following communication lower bound: 31/2n3/M1/2 + 2n2 or Ω (no. of FLOPs / M1/2) == Previous approaches for reducing communication == Most of the approaches investigated in the past to address this problem rely on scheduling or tuning techniques that aim at overlapping communication with computation. However, this approach can lead to an improvement of at most a factor of two. Ghosting is a different technique for reducing communication, in which a processor stores and computes redundantly data from neighboring processors for future computations. Cache-oblivious algorithms represent a different approach introduced in 1999 for fast Fourier transforms, and then extended to graph algorithms, dynamic programming, etc. They were also applied to several operations in linear algebra as dense LU and QR factorizations. The design of architecture specific algorithms is another approach that can be used for reducing the communication in parallel algorithms, and there are many examples in the literature of algorithms that are adapted to a given communication topology.

  Read more →
• 

  Wearable technology

  Wearable technology is a category of small electronic and mobile devices with wireless communications capability designed to be worn on the human body and are incorporated into gadgets, accessories, or clothes. Common types of wearable technology include smartwatches, fitness trackers, and smartglasses. Wearable electronic devices are often close to or on the surface of the skin, where they detect, analyze, and transmit information such as vital signs, and/or ambient data and which allow in some cases immediate biofeedback to the wearer. Wearable devices collect vast amounts of data from users making use of different behavioral and physiological sensors, which monitor their health status and activity levels. Wrist-worn devices include smartwatches with a touchscreen display, while wristbands are mainly used for fitness tracking but do not contain a touchscreen display. Wearable devices such as activity trackers are an example of the Internet of things, since "things" such as electronics, software, sensors, and connectivity are effectors that enable objects to exchange data (including data quality) through the internet with a manufacturer, operator, and/or other connected devices, without requiring human intervention. Wearable technology offers a wide range of possible uses, from communication and entertainment to improving health and fitness, however, there are worries about privacy and security because wearable devices have the ability to collect personal data. Wearable technology has a variety of use cases which is growing as the technology is developed and the market expands. It can be used to encourage individuals to be more active and improve their lifestyle choices. Healthy behavior is encouraged by tracking activity levels and providing useful feedback to enable goal setting. This can be shared with interested stakeholders such as healthcare providers. Wearables are popular in consumer electronics, most commonly in the form factors of smartwatches, smart rings, and implants. Apart from commercial uses, wearable technology is being incorporated into navigation systems, advanced textiles (e-textiles), and healthcare. As wearable technology is being proposed for use in critical applications, like other technology, it is vetted for its reliability and security properties. == History == In the 1500s, German inventor Peter Henlein (1485–1542) created small watches that were worn as necklaces. A century later, pocket watches grew in popularity as waistcoats became fashionable for men. Wristwatches were created in the late 1600s but were worn mostly by women as bracelets. Pedometers were developed around the same time as pocket watches. The concept of a pedometer was described by Leonardo da Vinci around 1500, and the Germanic National Museum in Nuremberg has a pedometer in its collection from 1590. In the late 1800s, the first wearable hearing aids were introduced. In 1904, aviator Alberto Santos-Dumont pioneered the modern use of the wristwatch. In 1949, American biophysicist Norman Holter invented the very first health monitoring device. His invention, the Holter monitor, was groundbreaking as one of the first wearable devices capable of tracking vital health data outside of a clinical setting. In the 1970s, calculator watches became available, reaching the peak of their popularity in the 1980s. From the early 2000s, wearable cameras were being used as part of a growing sousveillance movement. Expectations, operations, usage and concerns about wearable technology was floated on the first International Conference on Wearable Computing. In 2008, Ilya Fridman incorporated a hidden Bluetooth microphone into a pair of earrings. Big tech companies such as Apple, Samsung, and Fitbit have expanded on this idea by interfacing with smartphones and personal computer software to collect a wide variety of data. Wearable devices include dedicated health monitors, fitness bands, and smartwatches. In 2010, Fitbit released its first step counter. Wearable technology which tracks information such as walking and heart rate is part of the quantified self movement. In 2013, McLear, also known as NFC Ring, released a "smart ring". The smart ring could make bitcoin payments, unlock other devices, and transfer personally identifying information, and also had other features. In 2013, one of the first widely available smartwatches was the Samsung Galaxy Gear. Apple followed in 2015 with the Apple Watch. === Prototypes === From 1991 to 1997, Rosalind Picard and her students, Steve Mann and Jennifer Healey, at the MIT Media Lab designed, built, and demonstrated data collection and decision making from "Smart Clothes" that monitored continuous physiological data from the wearer. These "smart clothes", "smart underwear", "smart shoes", and smart jewellery collected data that related to affective state and contained or controlled physiological sensors and environmental sensors like cameras and other devices. At the same time, also at the MIT Media Lab, Thad Starner and Alex "Sandy" Pentland develop augmented reality. In 1997, their smartglass prototype is featured on 60 Minutes and enables rapid web search and instant messaging. Though the prototype's glasses are nearly as streamlined as modern smartglasses, the processor was a computer worn in a backpack – the most lightweight solution available at the time. In 2009, Sony Ericsson teamed up with the London College of Fashion for a contest to design digital clothing. The winner was a cocktail dress with Bluetooth technology making it light up when a call is received. Zach "Hoeken" Smith of MakerBot fame made keyboard pants during a "Fashion Hacking" workshop at a New York City creative collective. The Tyndall National Institute in Ireland developed a "remote non-intrusive patient monitoring" platform which was used to evaluate the quality of the data generated by the patient sensors and how the end users may adopt to the technology. More recently, London-based fashion company CuteCircuit created costumes for singer Katy Perry featuring LED lighting so that the outfits would change color both during stage shows and appearances on the red carpet such as the dress Katy Perry wore in 2010 at the MET Gala in NYC. In 2012, CuteCircuit created the world's first dress to feature Tweets, as worn by singer Nicole Scherzinger. In 2010, McLear, also known as NFC Ring, developed prototypes of its "smart ring" devices, before a Kickstarter fundraising in 2013. In 2014, graduate students from the Tisch School of Arts in New York designed a hoodie that sent pre-programmed text messages triggered by gesture movements. Around the same time, prototypes for digital eyewear with heads up display (HUD) began to appear. The US military employs headgear with displays for soldiers using a technology called holographic optics. In 2010, Google started developing prototypes of its optical head-mounted display Google Glass, which went into customer beta in March 2013. == Usage == In the consumer space, sales of smart wristbands (aka activity trackers such as the Jawbone UP and Fitbit Flex) started accelerating in 2013. One in five American adults have a wearable device, according to the 2014 PriceWaterhouseCoopers Wearable Future Report. As of 2009, decreasing cost of processing power and other components was facilitating widespread adoption and availability. In professional sports, wearable technology has applications in monitoring and real-time feedback for athletes. Examples of wearable technology in sport include accelerometers, pedometers, and GPS's which can be used to measure an athlete's energy expenditure and movement pattern. In cybersecurity and financial technology, secure wearable devices have captured part of the physical security key market. McLear, also known as NFC Ring, and VivoKey developed products with one-time pass secure access control. In health informatics, wearable devices have enabled better capturing of human health statistics for data driven analysis. This has facilitated data-driven machine learning algorithms to analyse the health condition of users. In business, wearable technology helps managers easily supervise employees by knowing their locations and what they are currently doing. Employees working in a warehouse also have increased safety when working around chemicals or lifting something. Smart helmets are employee safety wearables that have vibration sensors that can alert employees of possible danger in their environment. == Wearable technology and health == Wearable technology is often used to monitor a user's health. Given that such a device is in close contact with the user, it can easily collect data. It started as soon as 1980 where first wireless ECG was invented. In the last decades, there has been substantial growth in research of e.g. textile-based, tattoo, patch, and contact lenses as well as circulation of a notion of "quantified self", transhumanism-related ideas, and growth of life ex

  Read more →
• 

  Attack path management

  Attack path management is a cybersecurity technique that involves the continuous discovery, mapping, and risk assessment of identity-based attack paths. Attack path management is distinct from other computer security mitigation strategies in that it does not rely on finding individual attack paths through vulnerabilities, exploits, or offensive testing. Rather, attack path management techniques analyze all attack paths present in an environment based on active identity management policies, authentication configurations, and active authenticated "sessions" between objects. == Overview == Attack path management relies on concepts such as mapping and removing attack paths, identifying attack path choke points, and remediation of attack paths. Identity-based attacks are present in most publicly disclosed breaches, whether through social engineering to gain initial access to Active Directories or lateral movement for privilege escalation. Attackers require privileges to attack an environment’s most sensitive segments. Attack path management often involves removing out-of-date privileges and privilege assignments given to overly large groups. In attack path management, attack graphs are used to represent how a network of machines’ security is vulnerable to attack. The nodes in an attack graph represent principals and other objects such as machines, accounts, and security groups. The edges in an attack graph represent the links and relationships between nodes. Some nodes are easy to penetrate due to short paths from regular users to domain admins, resulting in focal points of concentrated network traffic, which are known as attack path choke points. Attack graphs are often analyzed using algorithms and visualization. Attack path management also identifies tier 0 assets, which are considered the most vulnerable because they have direct or indirect control of an Active Directory or Microsoft Entra ID environment.

  Read more →
• 

  Bibliographic database

  A bibliographic database is a database of bibliographic records. This is an organised online collection of references to published written works like journal and newspaper articles, conference proceedings, reports, government and legal publications, patents and books. In contrast to library catalogue entries, a majority of the records in bibliographic databases describe articles and conference papers rather than complete monographs, and they generally contain very rich subject descriptions in the form of keywords, subject classification terms, or abstracts. A bibliographic database may cover a wide range of topics or one academic field like computer science. A significant number of bibliographic databases are marketed under a trade name by licensing agreement from vendors, or directly from their makers: the indexing and abstracting services. Many bibliographic databases have evolved into digital libraries, providing the full text of the organised contents:for instance CORE also organises and mirrors scholarly articles and OurResearch develops a search engine for open access content in Unpaywall. Others merge with non-bibliographic and scholarly databases to create more complete disciplinary search engine systems, such as Chemical Abstracts or Entrez. == History == Prior to the mid-20th century, individuals searching for published literature had to rely on printed bibliographic indexes, generated manually from index cards. During the early 1960s computers were used to digitize text for the first time; the purpose was to reduce the cost and time required to publish two American abstracting journals, the Index Medicus of the National Library of Medicine and the Scientific and Technical Aerospace Reports of the National Aeronautics and Space Administration (NASA). By the late 1960s, such bodies of digitized alphanumeric information, known as bibliographic and numeric databases, constituted a new type of information resource. Online interactive retrieval became commercially viable in the early 1970s over private telecommunications networks. The first services offered a few databases of indexes and abstracts of scholarly literature. These databases contained bibliographic descriptions of journal articles that were searchable by keywords in author and title, and sometimes by journal name or subject heading. The user interfaces were crude, the access was expensive, and searching was done by librarians on behalf of "end users".

  Read more →
• 

  International Philosophical Bibliography

  The International Philosophical Bibliography (IPB), also known in French as Répertoire bibliographique de la philosophie (RBP), is a bibliographic database covering publications on the history of philosophy and continental philosophy. The database comprises records of publications in over 30 languages. Annually, about 12,000 records are added. The indexes include, among other elements, over 84,000 names of authors, editors, translators, reviewers, and collaborators, as well as more than 3,000 commentaries on philosophical works, making it the world's most complete index in Philosophy. Since 1934, the IPB has been developed by the Higher Institute of Philosophy at the University of Louvain (UCLouvain), first in Leuven and since 1978 in Louvain-la-Neuve. The online version was launched by Peeters Publishers in 1997 and continues to be updated quarterly.

  Read more →
• 

  Data janitor

  A data janitor is a person who works to take big data and condense it into useful amounts of information. Also known as a "data wrangler", a data janitor sifts through data for companies in the information technology industry. A multitude of start-ups rely on large amounts of data, so a data janitor works to help these businesses with this basic, but difficult process of interpreting data. While it is a commonly held belief that data janitor work is fully automated, many data scientists are employed primarily as data janitors. The information technology industry has been increasingly turning towards new sources of data gathered on consumers, so data janitors have become more commonplace in recent years.

  Read more →
• 

  Spanner (database)

  Spanner is a distributed SQL database management and storage service developed by Google. It provides features such as global transactions, strongly consistent reads, and automatic multi-site replication and failover. Spanner is used in Google F1, the database for its advertising business Google Ads, as well as Gmail and Google Photos. == Features == Spanner stores large amounts of mutable structured data. Spanner allows users to perform arbitrary queries using SQL with relational data while maintaining strong consistency and high availability for that data with synchronous replication. Key features of Spanner: Transactions can be applied across rows, columns, tables, and databases within a Spanner universe. Clients can control the replication and placement of data using automatic multi-site replication and failover. Replication is synchronous and strongly consistent. Reads are strongly consistent and data is versioned to allow for stale reads: clients can read previous versions of data, subject to garbage collection windows. Supports a native SQL interface for reading and writing data. Support for Graph Query Language == History == Spanner was first described in 2012 for internal Google data centers. Spanner's SQL capability was added in 2017 and documented in a SIGMOD 2017 paper. It became available as part of Google Cloud Platform in 2017, under the name "Cloud Spanner". == Architecture == Spanner uses the Paxos algorithm as part of its operation to shard (partition) data across up to hundreds of servers. It makes heavy use of hardware-assisted clock synchronization using GPS clocks and atomic clocks to ensure global consistency. TrueTime is the brand name for Google's distributed cloud infrastructure, which provides Spanner with the ability to generate monotonically increasing timestamps in data centers around the world. Google's F1 SQL database management system (DBMS) is built on top of Spanner, replacing Google's custom MySQL variant.

  Read more →
• 

  Enterprise information integration

  Enterprise information integration (EII) is the ability to support a unified view of data and information for an entire organization. The goal of EII is to get a large set of heterogeneous data sources to appear to a user or system as a single, homogeneous data source. In a data virtualization application of EII, there is a process of information integration, using data abstraction to provide a unified interface (known as uniform data access) for viewing all the data within an organization, and a single set of structures and naming conventions (known as uniform information representation) to represent this data. == Overview == Data within an enterprise can be stored in heterogeneous formats, including relational databases (which themselves come in a large number of varieties), text files, XML files, spreadsheets and a variety of proprietary storage methods, each with their own indexing and data access methods. Standardized data access APIs have emerged that offer a specific set of commands to retrieve and modify data from a generic data source. Many applications exist that implement these APIs' commands across various data sources, most notably relational databases. Such APIs include ODBC, JDBC, XQJ, OLE DB, and more recently ADO.NET. There are also standard formats for representing data within a file that are very important to information integration. The best-known of these is XML, which has emerged as a standard universal representation format. There are also more specific XML "grammars" defined for specific types of data such as Geography Markup Language for expressing geographical features and Directory Service Markup Language for holding directory-style information. In addition, non-XML standard formats exist such as iCalendar for representing calendar information and vCard for business card information. Enterprise Information Integration (EII) applies data integration commercially. Despite the theoretical problems described above, the private sector shows more concern with the problems of data integration as a viable product. EII emphasizes neither correctness nor tractability, but speed and simplicity. === Uniform data access === Uniform data access means connectivity and controllability across numerous target data sources. Necessary to fields such as EII and Electronic Data Interchange (EDI), it is most often used regarding analysis of disparate data types and data sources, which must be rendered into a uniform information representation, and generally must appear homogenous to the analysis tools—when the data being analyzed is typically heterogeneous and widely varying in size, type, and original representation. === Uniform information representation === Uniform information representation allows information from several realms or disciplines to be displayed and worked with as if it came from the same realm or discipline. It takes information from a number of sources, which may have used different methodologies and metrics in their data collection, and builds a single large collection of information, where some records may be more complete than others across all fields of data Uniform information representation is particularly important in EII and Electronic Data Interchange (EDI), where different departments of a large organization may have collected information for different purposes, with different labels and units, until one department realized that data already collected by those other departments could be re-purposed for their own needs—saving the enterprise the effort and cost of re-collecting the same information. === Combining disparate data sets === Each data source is disparate and as such is not designed to support EII. Therefore, data virtualization as well as data federation depends upon accidental data commonality to support combining data and information from disparate data sets. Because of this lack of data value commonality across data sources, the return set may be inaccurate, incomplete, and impossible to validate. One solution is to recast disparate databases to integrate these databases without the need for ETL. The recast databases support commonality constraints where referential integrity may be enforced between databases. The recast databases provide designed data access paths with data value commonality across databases. === Simplicity of deployment === Even if recognized as a solution to a problem, EII as of 2009 currently takes time to apply and offers complexities in deployment. Proposed schema-less solutions include "Lean Middleware". === Handling higher-order information === Analysts experience difficulty—even with a functioning information integration system—in determining whether the sources in the database will satisfy a given application. Answering these kinds of questions about a set of repositories requires semantic information like metadata and/or ontologies. == Applications == EII products enable loose coupling between homogeneous-data consuming client applications and services and heterogeneous-data stores. Such client applications and services include Desktop Productivity Tools (spreadsheets, word processors, presentation software, etc.), development environments and frameworks (Java EE, .NET, Mono, SOAP or RESTful Web services, etc.), business intelligence (BI), business activity monitoring (BAM) software, enterprise resource planning (ERP), Customer relationship management (CRM), business process management (BPM and/or BPEL) Software, and web content management (CMS). == Data access technologies == Service Data Objects (SDO) for Java, C++ and .Net clients and any type of data source XQuery and XQuery API for Java

  Read more →
• 

  Non-personal data

  Non-Personal Data (NPD) is electronic data that does not contain any information that can be used to identify a natural person. Thus, it can either be data that has no personal information to begin with (such as weather data, stock prices, data from anonymous IoT sensors); or it is data that had personal data that was subsequently pseudoanonymized (for example, identifiable strings substituted with random strings) or anonymized (such as by irreversibly removing all personal data). NPD is part of the overall Data Governance Strategy of a region or country. While personal data are covered by Data Protection Legislation such as GDPR, other kinds of data would fall under the scope of NPD Regulation. == Importance of non-personal data == It has been pointed out that the future is data-driven. What this means is that much of the present innovation taking place in domains such as Machine Learning and Artificial Intelligence is fueled by data, which is needed for calibrating the complex models (comprising neural network-based as well as other kinds). The larger the volume, diversity and quality of the data, the higher is the quality of the model, leading to better predictions and explanations. However, there is a flip-side to data availability. The newly-emerging awareness of privacy and the consequent need for powerful Data Protection Regulations (such as GDPR) makes it increasingly difficult or impossible to obtain data in the quantities required. This is a contradiction, and the only way out would be to remove all personal data from data sets (either by Data anonymization or Pseudonymization coupled with noise injection, at which point it becomes NPD. Therefore, many innovation-friendly countries are coming out with regulatory regimes that would ensure that personal data is protected, while, at the same time, non-personal data can be extracted from personal data so that innovation is fostered. In other words, NPD 'unlocks' value that was locked away in data sets that have personally-identifiable information. It is expected that multiple NPD data sets will begin to be available on free or commercial basis from different providers once the regulations are in place. == Emerging regulatory frameworks == Non-Personal Data has significant uses that may be economic, social, political or security-related. Several countries and regions are in the process of regulating the use of NPD. In May 2019, the European Union operationalized its Regulation of the Free Flow of NPD. India announced a nine-member expert committee to make recommendations on the regulation of NPD in 2019, which published its first report in mid-2020. The report was opened for public comments, after which it was revised and published in December 2020. == Proposed NPD regulatory framework in India == The following were the objectives of the proposed Indian regulation as per the revised report: Sovereignty: India has rights over the data of India, its people and organisations. Benefit India: Benefits of data must accrue to India and its people. Benefits the world: Innovation, new models and algorithms for the world. Privacy: Misuse, reidentification and harms must be prevented. Simplicity: The regulations should be simple, digital and unambiguous. Innovation and entrepreneurship: The data should be freely available for innovation and entrepreneurship in India. == Concerns == The major concern in the use of NPD is if there are techniques (statistical or AI-based) by which multiple data sets can be used to extract personally-identifiable data.

  Read more →
• 

  Technical data management system

  A technical data management system (TDMS) is a document management system (DMS) pertaining to the management of technical and engineering drawings and documents. Often the data are contained in 'records' of various forms, such as on paper, microfilms or digital media. Hence technical data management is also concerned with record management involving technical data. Technical document management systems are used within large organisations with large scale projects involving engineering. For example, a TDMS can be used for integrated steel plants (ISP), automobile factories, aero-space facilities, infrastructure companies, city corporations, research organisations, etc. In such organisations, technical archives or technical documentation centres are created as central facilities for effective management of technical data and records. TDMS functions are similar to that of conventional archive functions in concepts, except that the archived materials in this case are essentially engineering drawings, survey maps, technical specifications, plant and equipment data sheets, feasibility reports, project reports, operation and maintenance manuals, standards, etc. Document registration, indexing, repository management, reprography, etc. are parts of TDMS. Various kinds of sophisticated technologies such as document scanners, microfilming and digitization camera units, wide format printers, digital plotters, software, etc. are available, making TDMS functions an easier process than previous times. == Constituents of a technical data management system == Technical data refers to both scientific and technical information recorded and presented in any form or manner (excluding financial and management information). A Technical Data Management System is created within an organisation for archiving and sharing information such as technical specifications, datasheets and drawings. Similar to other types of data management system, a Technical Data Management System consists of the 4 crucial constituents mentioned below. === Data planning === Data plans (long-term or short-term) are constructed as the first essential step of a proper and complete TDMS. It is created to ultimately help with the 3 other constituents, data acquisition, data management and data sharing. A proper data plan should not exceed 2 pages and should address the following basics: Types of data (samples, experiment results, reports, drawings, etc.) and metadata (data that summarizes and describes other data. In this case, it refers to details such as sample sizes, experiment conditions and procedures, dates of reports, explanations of drawings, etc.) Means of researches and collections of data (field works, experiments in production lines, etc.) Costs of researches Policies for access, sharing (re-use within the organisation and re-distribution to the public) Proposals for archiving data and maintaining access to it === Data acquisition === Raw data is collected from primary sites of the organisations through the use of modern technologies. Please reference the table below for examples. The data collected is then transferred to technical data centres for data management. === Data management === After data acquisition, data is sorted out, whilst useful data is archived, unwanted data is disposed. When managing and archiving data, the features below of the data are considered. Names, labels, values and descriptions for variables and records. (In the case of TDMS, one example is names of equipments on an equipment datasheet) Derived data from the original data, with code, algorithm or command file used to create them. (In the case of TDMS, one example is an expectation report derived from the analysis of an equipment datasheet) Metadata associates with the data being archived === Data sharing === Archived and managed data are accessible to rightful entities. A proper and complete TDMS should share data to a suitable extent, under suitable security, in order to achieve optimal usage of data within the organisation. It aims for easy access when reused by other researchers and hence it enhances other research processes. Data is often referred in other tests and technical specifications, where new analysis is generated, managed and archived again. As a result, data is flowing within the organisation under effective management through the use of TDMS. == Advantages and disadvantages of usage of technical data management systems == There are strengths and weakness when using technical data management systems (TDMS) to archive data. Some of the advantages and disadvantages are listed below. === Advantages === ==== 1. Faster and easier data management ==== Since TDMS is integrated into the organisation's systems, whenever workers develop data files (SolidWorks, AutoCAD, Microsoft Word, etc.), they can also archive and manage data, linking what they need to their current work, at the same time they can also update the archives with useful data. This speeds up working processes and makes them more efficient. ==== 2. Increased security ==== All data files are centralized, hence internal and external data leakages are less likely to happen, and the data flow is more closely monitored. As a result, data in the organisation is more secured. ==== 3. Increased collaboration within the organisation ==== Since the data files are centralized and the data flow within the organisation increases, researchers and workers within the organisation are able to work on joint projects. More complex tasks can be performed for higher yields. ==== 4. Compatible to various formats of data ==== TDMS is compatible to many formats of data, from basic data like Microsoft Words to complex data like voice data. This enhances the quality of the management of data archived. === Disadvantages === ==== 1. Higher financial costs ==== Implementing TDMS into the organisation's systems involves monetary costs. Maintenance costs certain amount of human resources and money as well. These resources involve opportunity costs as they can be utilized in other aspects. ==== 2. Lower stability ==== Since TDMS manages and centralizes all the data the organisation processes, it links the working processes within the whole organisation together. It also increases the vulnerability of the organisation data network. If TDMS is not stable enough or when it is exposed to hacker and virus attacks, the organisation's data flow might shut down completely, affecting the work in an organisation-wide scale and leading to a lower stability as results. == Comparison between traditional data management approaches and technical data management systems == Test engineers and researchers are facing great challenges in turning complex test results and simulation data into usable information for higher yields of firms. These challenges are listed below. Increase in complication of designs Reduced in time and budgets available Higher quality is demanded === Traditional data management approaches === Many organisations are still applying the conventional file management systems, due to the difficulty in building a proper and complete archives for data management. The first approach is the simple file-folder system. This costs the problem of ineffectiveness as workers and researchers have to manually go through numerous layers of systems and files for the target data. Moreover, the target data may contain files with different formats and these files may not be stored in the same machine. These files are also easily lost if renamed or moved to another location. The second approach is conventional databases such as Oracle. These databases are capable of enabling easy search and access of data. However, a great drawback is that huge effort for preparing and modeling the data is required. For large-scale projects, huge monetary costs are induced, and extra IT human resources must be employed for constant handling, expanding and maintaining the inflexible system, which is custom for specific tasks, instead of all tasks. In the long-term, it is not cost-effective. === Technical data management systems (TDMS) === TDMS is developed based on 3 principles, flexible and organized file storage, self-scaling hybrid data index, and an interactive post-processing environment. The system in practical, mainly consists of 3 components, data files with essential and relevant Metadata, data finders for organizing and managing data regardless of files formats, and, a software of searching, analyzing and reporting. With metadata attached to original data files, the data finder can identify different related data files during searches, even if they are in different file formats. TDMS hence allows researchers to search for data like browsing the Internet. Last but not least, it can adapt to changes and update itself according to the changes, unlike databases. == Comparison between strong information systems and weak information systems == Complex organizations may need large amounts

  Read more →
• 

  Concurrent MetateM

  Concurrent MetateM is a multi-agent language in which each agent is programmed using a set of (augmented) temporal logic specifications of the behaviour it should exhibit. These specifications are executed directly to generate the behaviour of the agent. As a result, there is no risk of invalidating the logic as with systems where logical specification must first be translated to a lower-level implementation. The root of the MetateM concept is Gabbay's separation theorem; any arbitrary temporal logic formula can be rewritten in a logically equivalent past → future form. Execution proceeds by a process of continually matching rules against a history, and firing those rules when antecedents are satisfied. Any instantiated future-time consequents become commitments which must subsequently be satisfied, iteratively generating a model for the formula made up of the program rules. == Temporal Connectives == The Temporal Connectives of Concurrent MetateM can divided into two categories, as follows: Strict past time connectives: '●' (weak last), '◎' (strong last), '◆' (was), '■' (heretofore), 'S' (since), and 'Z' (zince, or weak since). Present and future time connectives: '◯' (next), '◇' (sometime), '□' (always), 'U' (until), and 'W' (unless). The connectives {◎,●,◆,■,◯,◇,□} are unary; the remainder are binary. === Strict past time connectives === ==== Weak last ==== ●ρ is satisfied now if ρ was true in the previous time. If ●ρ is interpreted at the beginning of time, it is satisfied despite there being no actual previous time. Hence "weak" last. ==== Strong last ==== ◎ρ is satisfied now if ρ was true in the previous time. If ◎ρ is interpreted at the beginning of time, it is not satisfied because there is no actual previous time. Hence "strong" last. ==== Was ==== ◆ρ is satisfied now if ρ was true in any previous moment in time. ==== Heretofore ==== ■ρ is satisfied now if ρ was true in every previous moment in time. ==== Since ==== ρSψ is satisfied now if ψ is true at any previous moment and ρ is true at every moment after that moment. ==== Zince, or weak since ==== ρZψ is satisfied now if (ψ is true at any previous moment and ρ is true at every moment after that moment) OR ψ has not happened in the past. === Present and future time connectives === ==== Next ==== ◯ρ is satisfied now if ρ is true in the next moment in time. ==== Sometime ==== ◇ρ is satisfied now if ρ is true now or in any future moment in time. ==== Always ==== □ρ is satisfied now if ρ is true now and in every future moment in time. ==== Until ==== ρUψ is satisfied now if ψ is true at any future moment and ρ is true at every moment prior. ==== Unless ==== ρWψ is satisfied now if (ψ is true at any future moment and ρ is true at every moment prior) OR ψ does not happen in the future.

  Read more →
• 

  Knowledge spillover

  Knowledge spillover is an exchange of ideas among individuals. Knowledge spillover is usually replaced by terminations of technology spillover, R&D spillover and/or spillover (economics) when the concept is specific to technology management and innovation economics. In knowledge management economics, knowledge spillovers are non-rival knowledge market costs incurred by a party not agreeing to assume the costs that has a spillover effect of stimulating technological improvements in a neighbor through one's own innovation. Such innovations often come from specialization within an industry. There are two kinds of knowledge spillovers: internal and external. Internal knowledge spillover occurs if there is a positive impact of knowledge between individuals within an organization that produces goods and/or services. An external knowledge spillover occurs when the positive impact of knowledge is between individuals outside of a production organization. Marshall–Arrow–Romer (MAR) spillovers, Porter spillovers and Jacobs spillovers are three types of spillovers. == Conceptualizations == === Marshall–Arrow–Romer === Marshall–Arrow–Romer (MAR) spillover has its origins in 1890, where the English economist Alfred Marshall developed a theory of knowledge spillovers. Knowledge spillovers later were extended by economists Kenneth Arrow (1962) and Paul Romer (1986). In 1992, Edward Glaeser, Hedi Kallal, José Scheinkman, and Andrei Shleifer pulled together the Marshall–Arrow–Romer views on knowledge spillovers and accordingly named the view MAR spillover in 1992. Under the Marshall–Arrow–Romer (MAR) spillover view, the proximity of firms within a common industry often affects how well knowledge travels among firms to facilitate innovation and growth. The closer the firms are to one another, the greater the MAR spillover. The exchange of ideas is largely from employee to employee, in that employees from different firms in an industry exchange ideas about new products and new ways to produce goods. The opportunity to exchange ideas that lead to innovations key to new products and improved production methods. Research on the Cambridge IT Cluster (UK) suggests that technological knowledge spillovers might only happen rarely and are less important than other cluster benefits such as labour market pooling. === Porter === Porter (1990), like MAR, argues that knowledge spillovers in specialized, geographically concentrated industries stimulate growth. He insists, however, that local competition, as opposed to local monopoly, fosters the pursuit and rapid adoption of innovation. He gives examples of Italian ceramics and gold jewellery industries, in which hundreds of firms are located together and fiercely compete to innovate since the alternative to innovation is demise. Porter's externalities are maximized in cities with geographically specialized, competitive industries. === Jacobs === Under the Jacobs spillover view, the proximity of firms from different industries affect how well knowledge travels among firms to facilitate innovation and growth. This is in contrast to MAR spillovers, which focus on firms in a common industry. The diverse proximity of a Jacobs spillover brings together ideas among individuals with different perspectives to encourage an exchange of ideas and foster innovation in an industrially diverse environment. Developed in 1969 by urbanist Jane Jacobs and John Jackson the concept that Detroit’s shipbuilding industry from the 1830s was the critical antecedent leading to the 1890s development of the auto industry in Detroit since the gasoline engine firms easily transitioned from building gasoline engines for ships to building them for automobiles. == Incoming and outgoing spillovers == Knowledge spillover has asymmetric directions. The focal entity and receives or outflows know-how to others, creating incoming and outgoing spillovers. Cassiman and Veugelers (2002) use survey data and estimate incoming and outgoing spillover and study the economic impacts. Incoming spillover increases growth opportunity and productivity improvements of receivers, while outgoing spillover leads to free rider problem in the technology competition. Chen et al. (2013) use econometric method to gauge incoming spillover, a way that applies for all companies without survey. They find that incoming spillover explains R&D profits of industrial firms. == Policy implications == As information is largely non-rival in nature, certain measures must be taken to ensure that, for the originator, the information remains a private asset. As the market cannot do this efficiently, public regulations have been implemented to facilitate a more appropriate equilibrium. As a result, the concept of intellectual property rights have developed and ensure the ability of entrepreneurs to temporarily hold on to the profitability of their ideas through patents, copyrights, trade secrets, and other governmental safeguards. Conversely, such barriers to entry prevent the exploitation of informational developments by rival firms within an industry. For example, Wang (2023) indicates that technology spillovers are reduced by 27% to 51% when trade secrets laws are implemented by the Uniform Trade Secrets Act in the US. On the other hand, when the research and development of a private firm results in a social benefit, unaccounted for within the market price, often greater than the private return of the firm's research, then a subsidy to offset the underproduction of that benefit might be offered to the firm in return for its continued output of that benefit. Government subsidies are often controversial, and while they might often result in a more appropriate social equilibrium, they could also lead to undesirable political repercussions as such a subsidy must come from taxpayers, some of whom may not directly benefit from the researching firm's subsidized knowledge spillover. The concept of knowledge spillover is also used to justify subsidies to foreign direct investment, as foreign investors help diffuse technology among local firms. == Examples == Business parks are a good specific example of concentrated businesses that may benefit from MAR spillover. Many semiconductor firms intentionally located their research and development facilities in Silicon Valley to take advantage of MAR spillover. In addition, the film industry in Los Angeles, California, and elsewhere relies on a geographic concentration of specialists (directors, producers, scriptwriters, and set designers) to bring together narrow aspects of movie-making into a final product. A general example of a knowledge spillover could be the collective growth associated with the research and development of online social networking tools like Facebook, YouTube, and Twitter. Such tools have not only created a positive feedback loop, and a host of originally unintended benefits for their users, but have also created an explosion of new software, programming platforms, and conceptual breakthroughs that have perpetuated the development of the industry as a whole. The advent of online marketplaces, the utilization of user profiles, the widespread democratization of information, and the interconnectivity between tools within the industry have all been products of each tool's individual developments. These developments have since spread outside the industry into the mainstream media as news and entertainment firms have developed their own market feedback applications within the tools themselves, and their own versions of online networking tools (e.g. CNN’s iReport).

  Read more →
• 

  Library history

  Library history is a subdiscipline within library science and library and information science focusing on the history of libraries and their role in societies and cultures. Some see the field as a subset of information history. Library history is an academic discipline and should not be confused with its object of study (history of libraries): the discipline is much younger than the libraries it studies. Library history begins in ancient societies through contemporary issues facing libraries today. Topics include recording mediums, cataloguing systems, scholars, scribes, library supporters and librarians. == Earliest libraries == The earliest records of a library institution as it is presently understood can be dated back to around 5,000 years ago in the Southwest Asian regions of the world. One of the oldest libraries found is that of the ancient library at Ebla (circa 2500 BCE) in present-day Syria. In the 1970s, the excavation at Ebla's library unearthed over 20,000 clay tablets written in cuneiform script. === Library in Mesopotamia === The Assyrian King Assurbanipal created one of the greatest libraries in Nineveh in the seventh century BCE. The collection consisted of over 30,000 tablets written in a variety of languages. The collection was cataloged both by the shape of the tablet and by the subject of the content. The library had separate rooms for the different topics: government, history, law, astronomy, geography, and so on. The tablets also contained myths, hymns, and even jokes. Assurbanipal would send scribes to visit every corner of his kingdom to copy the content of other libraries. His library contained many of the most important literary works of the day, including the epic of Gilgamesh. Assurbanipal's Royal Library also had one of the first library catalogs. Unfortunately, Nineveh was eventually destroyed, and the library was lost in a fire. === Libraries in Ancient Greece === The Greek government was the first to sponsor public libraries. By 500 BCE both Athens and Samos had begun creating libraries for the public, though as most of the population was illiterate these spaces were serving a small, educated portion of the community. Athens developed a city archive at the Metroon in 405 BCE, where documents were stored in sealed jars. These would have saved the documents, but they would have been difficult to consult regularly. In Paros, around the same time, contracts were placed in the temple for safe keeping, and a book curse was placed for extra protection. === Library of Alexandria === The Library at Alexandria, Egypt, was renowned in the third century BCE while kings Ptolemy I Soter and Ptolemy II Philadelphus reigned. The library included a museum, garden, meeting areas and of course reading rooms. The Great Library, as it is known, was one of many in Alexandria. From its inception around the second century BCE, Alexandria was a well-known center for learning. It earned renown as the intellectual capital of the Western world up through the third century CE. The librarians at Alexandria collected, copied, and organized scrolls from across the known world. According to a primary source, every ship that came to Alexandria was required to hand over their books to be copied, and the copies would be returned to the owner, the library keeping the original. The Library of Alexandria was damaged by various disasters over time, including fire, invasion, and earthquake. Scholars believe the collection slowly diminished over time due to theft and efforts to remove it ahead of invading armies. While there are popular stories about how the library was ultimately destroyed, most of these are more myth than fact. === Libraries in Rome === Julius Caesar and his successor Augustus were the first to establish public libraries in ancient Rome, including the library of Apollo on the Palatine Hill. Several emperors followed suit over the next four centuries, including Hadrian, Tiberius, and Vespasian. Roman aristocrats also had personal libraries, which usually contained works in both Greek and Latin. A valuable example of this has been found at Herculaneum near Pompeii. Papyrus manuscripts in Herculaneum's Villa of the Papyri were encased in ash after the eruption of Vesuvius in 79 CE. Modern archaeology is now able to scan these artifacts and discern their contents, including many writings from Philodemus. The average Roman would not have been familiar with books beyond what they might hear read aloud in the forum. Public figures would pay for particular passages to be read aloud to the public from the steps of a public library. === Libraries in the Middle Ages === In the European Middle Ages, libraries began to become more prevalent, despite a widespread reduction in new writing beyond religious themes. Most libraries were initially connected to monasteries or religious institutions. Scriptoriums copied Christian religious texts to share with other religious centers or to be read aloud to their own parishioners. The Holy Roman Emperor Charlemagne (r. 786-814) had a large impact on the advancement of written culture in the Medieval Christian world, acquiring as many written works as he could, and employing many scribes to copy and recirculate vernacular versions of religious works. Most of the text held in small personal libraries was still religious in nature. == Early modern libraries == === Libraries of the Renaissance === During the Renaissance era the merchant middle class grew, and more people found benefits in education. They relied on libraries as a place to study and gain knowledge. Libraries provided a valuable resource, enriching the culture of those who were educated. Universities that had been started in the Middle Ages, founded their own libraries. Books in these libraries could not be borrowed from these libraries and were generally chained to the shelves to prevent theft. As more of the population became literate, new ideas like Humanism and Natural Law spawned an increase personal libraries, although they remained small. Gutenberg's invention of the printing press in 1456 opened the door to the modern era for libraries. == Oldest working libraries == According to the German librarian Michael Knoche, it is not possible to determine which library is the “oldest”: "Precise year dates are a construct, especially in the case of very old libraries. When a collection of books deserves to be called a library depends very much on the point of view of the observer." Various libraries are referred to as the “oldest”: The library founded in the 6th century of the Saint Catherine's Monastery in Sinai is "reputedly the oldest continuously run library in existence today", according to the Library of Congress. Its collection of religious and secular manuscripts is ranging from Bibles, liturgies and prayer books to legal documents such as deeds, court cases and fatwahs (legal opinions). The Al Qarawiyyin Library was founded in 859 by Fatima al-Fihri and is often regarded as the oldest working library in the world. It is in Fez, Morocco and is part of the oldest continually operating university in the world, the University of al-Qarawiyyin. The library houses approximately 4,000 ancient Islamic manuscripts. These manuscripts include 9th century Qurans and the oldest known accounts of the Islamic prophet Muhammed. The Malatestiana Library (Italian: Biblioteca Malatestiana) is a public library in the city of Cesena in northern Italy. Opened in 1454 it is significant for being the first civic library in Europe open to the general public. == Library history reports and writings of the early 19th and 20th century == In the early 19th and 20th century, representative titles were created reporting library history in the United States and the United Kingdom. American titles include Public Libraries in the United States of America, Their History, Condition, and Management (1876), Memorial History of Boston (1881) by Justin Winsor, Public Libraries in America (1894) by William I. Fletcher, and History of the New York Public Library (1923) by Henry M. Lydenberg. British titles include Old English Libraries (1911) by Earnest A. Savage and The Chained Library: A Survey of Four Centuries in the Evolution of the English Library by Burnett Hillman Streeter. In the beginning of the 20th century, library historians began applying scientific research methodologies to examine the library as a social agency. Two works that demonstrate this argument are Geschichte der Bibliotheken (1925) by Alfred Hessel and the Library Quarterly article from 1931, “The Sociological Beginnings of the Library Movement in America” by Arnold Borden. With the establishment of library schools, master's theses and doctoral dissertations represented the shift in serious research regarding libraries and library history. Two published doctoral dissertations that mark this trend are Foundations of the Public Library: The Origins of the American Public Library Movement in Ne

  Read more →